Makita Coil Nailers
Makita coil nailer kit is for fast, repeat fixing when you are banging out fencing, cladding, or timber frames and cannot waste time reloading.
When you are on repetitive timber fixing, a Makita coil nailer keeps the pace up and your fixings consistent, especially on long runs like fencing rails and sheathing. If you are already set up with a compressor, a Makita air nailer is a tidy way to save your wrists and get more done per day. Pick the right nail size and collated type for the timber and treatment, then crack on.
What Jobs Are Makita Coil Nailers Best At?
- Fixing fence panels, rails, and feather edge where you need quick, repeat shots all day without stopping to reload stick strips every few minutes.
- Running cladding and timber sheathing on sheds, site offices, and refurb extensions where consistent depth and speed keeps the line neat and the job moving.
- Building pallets, crates, and general timber assemblies in workshops or yard work where a coil magazine makes sense on high-volume nailing.
- First-fix timber work like noggins and bracing where a Makita air nailer helps you keep one hand on the work and one on the gun, instead of swinging a hammer in awkward spots.
Choosing the Right Makita Coil Nailer
Match the gun to the nails you actually use on site, because the wrong capacity or collation will have you stuck with boxes of nails that do not fit.
1. Nail length and diameter
If you are mostly on fencing and cladding, you will want a coil nailer that comfortably covers the lengths you use day to day. If you regularly step up into thicker timbers, do not gamble on a gun that tops out short, because you will end up swapping tools mid job.
2. Nail collation type and angle
Coil nails come in different collations depending on the application. If your merchant stocks one type reliably, buy the Makita coil nailer that matches it, otherwise you will be driving across town for nails that fit the magazine.
3. Air supply and site set-up
A Makita air nailer is only as good as the compressor and hose feeding it. If you are working a long way from the van, run a decent bore hose and make sure the compressor can keep up, otherwise you will be waiting for pressure and blaming the gun.
Makita Coil Nailer FAQs
Who makes the best coil nailer?
It depends on what you value, but on UK sites Makita is a safe bet for coil nailers because parts support, build quality, and day to day reliability are there. The best one for you is the model that matches your nail type and the work you do most, not whatever has the biggest spec sheet.
What is a coil nailer used for?
Coil nailers are used for high-volume timber fixing like fencing, cladding, sheathing, pallets, and general first-fix where you want speed and fewer reloads. The coil magazine is the whole point, it keeps you firing longer on repetitive runs.
Do Makita coil nailers need a big compressor to run properly?
They need a compressor that can maintain the required pressure and airflow for continuous shooting. If the compressor is under-sized you will get inconsistent drive depth and more stoppages, especially when you are rattling through nails on fencing or sheathing.
Will a Makita air nailer jam if I use any coil nails?
Yes, it can. Coil nails are not all the same, and the wrong collation or size is a common cause of jams and misfeeds. Stick to nails that match the gun spec and you will have a far smoother day.
Are coil nailers suitable for treated outdoor timber?
They are, but you need the right nails. For fencing and exterior work, use nails with a suitable coating or stainless option where required, otherwise you can end up with rust streaks and fixings failing long before the timber does.
Who Uses Makita Coil Nailers on Site?
- Chippies and joiners doing first-fix and timber framing because it speeds up repetitive fixing and keeps the work tighter than rushed hand nailing.
- Fencers and landscapers who are constantly on rails, boards, and posts and need a gun that will run through a coil without constant reloads.
- Site maintenance and facilities teams doing repairs, hoarding, and temporary works who want quick fixing with predictable results when time is tight.
The Basics: Understanding Coil Nailers
A coil nailer is built for volume. The nails sit in a round magazine so you can keep firing longer between reloads, which matters on fencing and long timber runs.
1. Coil magazine capacity
More nails per load means fewer stoppages when you are mid run on cladding or rails. It is not about being fancy, it is about not breaking your rhythm every few minutes.
2. Pneumatic firing
With a Makita air nailer, the compressor provides the power and the gun controls the shot, so you get repeatable driving without swinging a hammer. Keep the air clean and set the pressure right and it will stay consistent.
3. Depth control and finish
Depth adjustment is what stops nails sitting proud or burying too deep, especially in mixed timber. Set it once for the material and you will spend less time going back with a punch or claw.
Coil Nailer Accessories That Keep You Working
The gun is only half the story. These extras stop downtime, misfires, and rough finishes when you are mid job.
1. Compressor and proper air hose
If the compressor cannot maintain pressure, the nailer will start under-driving and you will be finishing by hand. A decent hose length and bore also stops pressure drop when you are working away from the van.
2. Airline regulator, filter, and oiler
Dirty, wet air is what kills pneumatic tools. A simple filter and regulator keeps the pressure stable, and an oiler helps the gun cycle cleanly so you are not stripping it down on a Friday afternoon.
3. Correct coil nails for the job
Buy nails that match the gun spec and the timber, including the right finish for treated outdoor work. It saves you jams, saves you split boards, and stops callbacks when fixings start rusting through.
Shop Makita Coil Nailers at ITS
Whether you need a Makita coil nailer for fencing, cladding, or high-volume timber fixing, we stock the range so you can pick the right nail capacity and spec for the work. It is all held in our own warehouse, in stock and ready for next day delivery so you are not stood on site waiting for kit.
