Festool Sanding Sheets
Festool sanding sheets give you clean, controllable finishes on timber, filler, and paint, with the right hole patterns to keep extraction working.
When you're flattening doors, keying up between coats, or knocking back filler on a refurb, the sheet matters as much as the sander. This range covers Festool sandpaper sheets for common pad sizes, including Festool orbital sanding sheets, Festool RTS 400 paper, and Festool Granat sheets, so you can match grit and hole pattern to the job and stop wasting discs.
What Jobs Are Festool Sanding Sheets Best At?
- Flattening and finishing bare timber on doors, skirting, and built-ins when you need a consistent scratch pattern that's easy to de-nib between coats.
- Keying paint and varnish on refurbs so the next coat bites properly, without tearing the surface up or leaving deep swirls to chase later.
- Knocking back filler and jointing compound on patch repairs where a steady cut saves you from digging holes and re-filling.
- Running Festool orbital sanding sheets with extraction on site to keep dust down in occupied properties and stop the paper clogging up after a few passes.
Choosing the Right Festool Sanding Sheets
Pick your sheet to suit the surface and the stage of the job, not just whatever grit is closest in the box.
1. Grit choice (cutting vs finishing)
If you're stripping back paint, levelling filler, or taking down high spots, start coarser and move up in steps. If you jump straight to a fine grit on rough work, you'll just glaze the sheet and waste time.
2. Match the sheet to the pad and hole pattern
If you're running Festool RTS 400 paper or any pad-specific sheet, make sure the size and extraction holes line up with your pad. If the holes don't match, extraction drops off and the paper clogs quicker, especially on paint and resinous timber.
3. Abrasive type for the material
If you're swapping between bare wood, old paint, and fillers on snagging, Festool Granat sheets are the safe all-rounder because they cope well across mixed surfaces without falling apart after a couple of edges.
Who Uses Festool Sanding Sheets?
- Chippies and joiners use Festool sanding sheets for finishing work because the right grit progression keeps edges crisp and saves time before lacquer or oil.
- Decorators rely on Festool sandpaper sheets for prep and de-nibbing between coats, especially on doors and trim where a bad scratch shows straight away.
- Kitchen fitters and maintenance teams keep a few grits in the van for quick touch-ins on fillers, scuffs, and site-made trims without dragging half the workshop out.
The Basics: Understanding Festool Sanding Sheets
A sanding sheet isn't just "a grit number". Size, hole pattern, and abrasive type decide how fast it cuts, how clean it finishes, and whether your extraction actually does its job.
1. Hole patterns and dust extraction
The holes are there to pull dust through the pad into the extractor. When they line up properly, you get a cleaner finish and the sheet lasts longer because it's not clogging up with dust and resin.
2. Sheet format (delta, rectangular, round)
Different sanders use different formats for a reason. Delta and rectangular sheets get into corners and along edges, while round orbital sanding sheets are for fast, even finishing across flat panels without leaving tramlines.
Shop Festool Sanding Sheets at ITS
Whether you need a quick top-up of Festool RTS 400 paper or you're stocking up on Festool Granat sheets in a full grit run, it's all here in one place. We hold a deep range of Festool sanding sheets in our own warehouse, ready for next day delivery so you can keep the job moving.
Festool Sanding Sheets FAQs
What is the best Festool sandpaper for bare wood?
For most bare timber finishing, Festool Granat sheets are the sensible pick because they cut clean and don't clog up quickly. Start coarse enough to level the surface, then work up through the grits rather than trying to "polish out" deep scratches with a fine sheet.
Do Festool sanding sheets have dust extraction holes?
Yes, Festool sanding sheets are made with extraction hole patterns to suit the pad they're designed for. Make sure you're buying the right format for your sander, because if the holes don't line up with the pad, extraction drops and the sheet clogs faster.
Will Festool orbital sanding sheets fit any random orbital sander?
Not always. Diameter is only half the story, because the hole pattern and backing need to match your pad for proper extraction and a flat sit. If you're using Festool sanders, stick to the correct Festool orbital sanding sheets for that model.
Why does my sandpaper clog up and stop cutting?
It's usually a mix of the wrong grit, poor extraction, or sanding finishes that are still soft. Use a sheet with the correct extraction holes, keep the extractor running, and don't lean on the sander, because pressure overheats the surface and loads the abrasive.
Do I need different sheets for corners and edges?
Yes, if you're working tight to frames, reveals, or internal corners, a round sheet on an orbital won't get right in. That's where pad-specific sheets like Festool RTS 400 paper earn their keep for straight edges and detail work.
