Makita DLX2414SJ 18V LXT 2 Piece Brushless Kit with 2x 3.0Ah Batteries, Charger and Case

Description

• Product Code:MAKDLX2414SJ
• Model Number: DLX2414SJ
• Barcode: 0088381744256

The Makita DLX2414SJ 18V LXT 2 Piece Kit from ITS includes:

DHP487 18V LXT Brushless Combi Drill

This impressively compact drill driver only weighs 1.1kg, making it incredibly versatile and portable – in fact, it is possibly the smallest combi drill in the 18V LXT Range.

This model includes 3-drilling modes: screwdriving mode (rotation with clutch) for achieving an even consistent finish when fastening screws. Drilling mode (rotation only) achieving 40 Nm max. torque. Hammer Drilling mode (rotation with hammering) on the for drilling in masonry up to a maximum 13 mm hole diameter.

This versatile power tool delivers a mechanical two gear speed control along with up to 40Nm Max Lock Torque.  This allows a wide scope of usability from drilling, fastening as well as the hammer drilling function.

An aluminium diecast cover is set around the gear housing which protects the gears against dust and moisture ingress.

The variable speed control determines the best results while a keyless chuck offers maximum accessory flexibility.  A built in Twin-LED work light allows you to illuminate the area you’re working in.

The brushless motor allows you to use the drill driver efficiently.  As part of the design, the drill utilizes every bit of battery power when you need, all while reducing the need for ongoing maintenance on the drill.

With 20 torque settings, reversible control, and electronic brake, this is versatile brushless drill that you will not let you down.

• Chuck capacity: 1.5 - 13 mm (1/16 - 1/2”)
• Drilling Capacity
• Steel: 13mm
• Wood: Auger bit: 36mm / Holesaw: 51mm / Self bit: 35mm
• Concrete: 13mm
• Impacts per minute:  High / Low: 0 - 25,500 / 0 - 7,500
• No load speed: High / Low: 0 - 1,700 / 0 - 500
• Max fastening torque: 40Nm

DTD157 18V LXT Brushless Impact Driver

This Impact driver is impressively powerful, despite its size.  Delivering up to 140N of maximum tightening torque. 

The driver features 2-stage power selection for controlled fastening speed and power.  This allows you to get the best out of the tool for the job at hand.  Thanks to the XPT design, this impact driver is able to work in the most harsh of conditions, without any loss of operational power.

The driver includes an integrated lockable bit holder allowing to accept the most common standard bits on the market.  The compact size and weight of the driver allows you to move easily and readily to the jobs that you need to complete.

The driver incorporates a highly efficient brushless motor that not only delivers the high torque power you need, all while reducing the need for on-going maintenance.  Along with the cell protection built in to the battery cells, it will stop overload and deep discharge.

• Max. capacities standard bolt: M5-M14
• Max. capacities high tensile bolt: M5-M12
• No load speed: Hard: 0 -3,000 rpm / Soft: 0 -1,300 rpm
• Impact rate:  Hard: 0 -4,100 ipm / Soft: 0 -2,000 ipm
• Max. tightening torque: 140 Nm
• Drive shank: 6.35 mm (1/4") Hex<